| Material: |
Solid aluminium 20-30 mm thick or honeycomb material |
| Méret, mm: |
The units should be arranged parallel to each other and may be spaced any distance from each other provided that the top plate is sufficiently rigid. The width of the top plate should not be more than about 1.5 times the length of the isolation units |
| Súly, kg: |
10 (per isolation unit) |
| Maximum load capacity, kg: |
1200 |
| Static Load: |
Minimum 0 kg, maximum 200 kg on each element |
| Static Compliance: |
Approx. 3,4 μm/N vertically, 6,8 μm/N horizontally |
| Főkategória: |
Tables & Breadboards |
| Alkategória1: |
Active Vibration Isolation |
| Alkategória2: |
Active Vibration Isolation System |
| Monitor Signal: |
A multiplexed signal can be used via the BNC-socket at the rear panel of the control unit to display it on an oscilloscope. It shows the vibration levels with and without isolation |
| Control Units: |
2 |
| Input Voltage: |
110-230 V AC±10%, 50-60 Hz |
| Power consumption: |
Typically 7 W, maximum 9 W |
| Isolating Elements: |
6 |
| Isolation: |
Dynamic 1Hz to 200 Hz, passive beyond 200 Hz |
| System noise: |
Less than 50 nG/vHz from 0.1 - 200 Hz in any direction |
| Transmissibility: |
See transmission curve.
Above 10 Hz transmissibility <30-35 dB decreasing rapidly beyond 100 Hz, depending on load |
| Single Isolator Size, mm: |
360x92x110,5 mm |
| Safety Class: |
1 |
| Fuses: |
2x1,6 A/250V slow, located in the power socket on the rear side of the control unit |
| Overload Indication: |
8 LEDs |
| Correction forces: |
Maximal ±8 N vertically, ±4 N horizontally |
Customer Reviews
No review has been published yet...