Main Page
Tables & Breadboards
Active Vibration Isolation
Active Vibration Isolation...

Filter

Manufacturers

Avenir

CE Optics

EKSMA Optics

Liop-Tec

Optika-Fotonika

Standa

Single Isolator Size, mm

360x92x110,5 mm

Temperature Range

5°C - 40°C

Relative Humidity

10-90% (5-30°C) / 10-60% (30-40°C)

Protection Class

IP 20

Safety Class

Fuses

2x1,6 A / 250 V slow, located in the power socket on the rear side of the unit

2x1,6 A/250V slow, located in the power socket on the rear side of the control unit

Főkategória

Tables & Breadboards

Alkategória1

Active Vibration Isolation

Overload Indication

8 LEDs

Correction forces

Maximal ±8 N vertically, ±4 N horizontally

Alkategória2

Active Vibration Isolation System

Power consumption

Maximum 10 W when isolating, maximum 20 W during load adjustment

Typically 7 W, maximum 9 W

Application

Indoor

Material

Solid aluminium 20-30 mm thick or honeycomb material

Description

with breadboard 725-5060

solid board without holes

with aluminium breadboard 715-5060

Size, mm

The units should be arranged parallel to each other and may be spaced any distance from each other provided that the top plate is sufficiently rigid. The width of the top plate should not be more than about 1.5 times the length of the isolation units

Maximum load capacity, kg

140

400

600

800

1000

1200

Static Load

Minimum 0 kg, maximum 200 kg on each element

Dimensions, mm

500x600x80 mm

Static Compliance

Approx. 3,4 μm/N vertically, 6,8 μm/N horizontally

Weight, kg

10 (per isolation unit)

Height, mm

Up to 2000 m (6 500 ft)

Monitor Signal

A multiplexed signal can be used via the BNC-socket at the rear panel of the control unit to display it on an oscilloscope. It shows the vibration levels with and without isolation

Control Units

Input Voltage

90-120V AC, 47-63 Hz / 200-240V AC, 47-63 Hz

110-230 V AC±10%, 50-60 Hz

Isolating Elements

Isolation

Dynamic 0,7 Hz to 200 Hz, mainly passive at a higher frequencies although for good stability the feedback is active at least 2 kHz,

Dynamic 1Hz to 200 Hz, passive beyond 200 Hz

System noise

Less than 50 nG/vHz from 0.1 - 200 Hz in any direction

Transmissibility

See Transmissibility Curve. Above 10 Hz transmissibility <0.01 (-40 dB)

See transmission curve. Above 10 Hz transmissibility <30-35 dB decreasing rapidly beyond 100 Hz, depending on load

Price

Active Vibration Isolation System

There are 8 products in the category

Sort:

Displayed products:

This Active Vibration Isolation System is a compact modular dynamic anti vibration system offering isolation against all six translational and rotational vibrations.